Learn C-47 Production Engine
Lesson 415 minutesSample film: Last Light

Shooting order

Put the scenes in the order you'll shoot them, split them into days, give the days dates, and let the app warn you when a day won't work.

Why it matters

Films aren't shot in story order. You shoot every scene at one location together, so the crew moves as few times as possible, and you fit about five pages into a day. Get the order wrong and you pay a crew to drive across town, or you find out on the day that a night scene is booked for the morning.

The shooting order (Stripboard) is where those decisions live. Everything after it, from who works which day to the daily plans and the budget, is worked out from it.

Watch

Strips and days

Every scene is one strip. A black bar ends each shoot day and shows its date, call time, sunrise and sunset, and how many pages and scenes it holds.

The Shooting order screen for Last Light: 18 shoot days, 94 6/8 pages, 54 scenes. Strips for scenes 10, 11, 27 and 28 on Main Street, then a black bar reading End of day 1, Mon, Oct 12, call 6:00 a.m., sunrise 7:40 a.m., sunset 7:07 p.m., 5 5/8 pages, 4 scenes. Below it a striped Company move row. The Checks card on the right says nothing to fix, with two ticked checks under it: scenes 27 and 28 kept on one day, and scene 60 in daylight. Under it, the Set colors card lists the sets. Callouts mark the strip for scene 10, the End of day 1 bar, a company move, the Checks card, and the Copy as a draft and Lock a copy as the baseline buttons.
The shooting order, at the top of day 1.
  1. A strip: scene number, inside or outside, where in the story, day or night, length in eighths, who's in it (cast numbers) and a note.
  2. A day break (Day break): End of day 1, with the date, the call, sunrise and sunset, and the day's pages.
  3. A company move: the whole unit changes location here. Add one with + Company move.
  4. The Checks card. It reads the board every time you change it.
  5. Copy as a draft makes a second board to try a different order on, without touching this one.
  6. Lock a copy as the baseline keeps a locked copy to measure later changes against. You'll use it in lesson 8.

Each strip is coloured by inside or outside and by day or night. The words are always on the strip too, in the Inside or outside and Day or night columns, so you never have to go by colour alone. The key, Strip colors, sits beside the board when no strip is selected. The little box round each scene number has a colour of its own: the set's colour, picked in the Set colors card, so scenes at one place stand out.

Strip colourMeans
WhiteDay, inside
Pale yellowDay, outside
Light blueNight, inside
Light greenNight, outside
OrangeDawn or dusk
Light greyNot given (the app can't tell from the scene heading)
The Strip colors key: white for Day, inside; pale yellow for Day, outside; light blue for Night, inside; light green for Night, outside; orange for Dawn or dusk; light grey for Not given. A note says italic means the time is not in the scene heading, and a pencil mark means a length set by hand.
The app's own key to the strip colours.

Making days

A scene only counts as shot on a day once it sits above a day break. Scenes that aren't on a day wait at the bottom under Not on a day yet. A new project starts with every scene there, and a scene you add to the script later lands there too.

The tools above the board: + Day break, + Banner and + Company move on the first row; Arrange by location, Day breaks every 5 pages, Suggest day breaks and Remove all day breaks on the second. Callouts mark + Day break, Arrange by location, the pages box and Suggest day breaks.
The tools above the board.
  1. + Day break adds a day break after the last day. With a strip selected it reads + Day break below selected and goes just under that strip.
  2. Arrange by location puts scenes at the same location next to each other, inside each day and among the scenes not on a day yet.
  3. Day breaks every sets how many pages you want in a day. 5 pages is a common target.
  4. Suggest day breaks takes the day breaks off and puts them back so each day has about that many pages, keeping the order.

Dating the shoot

With no strip selected, the Shoot calendar card beside the board dates every day for you. Change the first shoot day and every day after it moves.

The Shoot calendar card: First shoot day 10/12/2026; Days off every week with Sun ticked; Other days off; Where you're shooting, Atlanta, Georgia, US, with its latitude, longitude and time zone; Rest between days, in hours, set to 10. Callouts mark First shoot day, Days off every week, Where you're shooting and Rest between days, in hours.
Last Light shoots from Monday 12 October 2026, with Sundays off, in Atlanta.
  1. First shoot day: each day after it is dated in turn, skipping days off.
  2. Days off every week: tick the days the unit never shoots. Other days off takes single dates, like a holiday.
  3. Where you're shooting: the city the app uses to work out sunrise and sunset for each date, on your own computer.
  4. Rest between days, in hours: from one day's wrap to the next day's call. The app says 10 is usual on non-union shoots.

A strip's details

Select a strip (click it, or Tab to it and press Enter) and its panel opens beside the board. This is also the way to move a strip without dragging.

The panel for Scene 41, EXT, Old Mill Road, Night. At the top, On Day 3 with up and down arrow buttons. Below: Day or night, Length set by hand, Note on the strip, a Has to be shot in daylight checkbox, Color for Old Mill Road, and Keep on one day with other scenes with an Add to a group menu. Callouts mark the On menu and arrows, the daylight checkbox and Keep on one day with other scenes.
The panel for scene 41.
  1. On moves the strip to any day, or back to Not on a day yet. The arrows, Move up and Move down, shift it one place.
  2. Has to be shot in daylight: the checks will warn if this scene lands on a day that runs in the dark.
  3. Keep on one day with other scenes: put scenes in a group (for a child actor, say) and the checks warn if the group gets split.

You can also drag a strip by its handle (⋮⋮) to a new place, as the line above the board says: Drag strips to change the order, or select one and use the panel. Dragging needs a mouse. The panel works with a mouse or the keyboard, so these steps use the panel.

Checks and Undo

The Checks card looks at rest between days, daylight, who and what is available, scenes kept together, minors' hours and tech scouts. A strip with a problem gets a red ! by its number, and choosing a check selects the strip it's about. As the card says, Checks warn; they never stop a move. The decision stays with you.

Big changes to the whole board (Arrange by location, Suggest day breaks, taking day breaks off) show a message with Undo right after them.

The board just after Suggest day breaks. The line above the board now reads 25 shoot days. A message reads Day breaks put in for about 5 pages a day: 25 shoot days, with Undo and Dismiss buttons. The Checks card now has 3 to look at, starting with Location can't be used: the bus depot can't be used on the new day 16. Callouts mark the new day count, the message and the Undo button.
After Suggest day breaks with 5 pages a day.
  1. The day count changes straight away: 25 shoot days instead of 18.
  2. What the change did, in words.
  3. Undo puts the board back as it was, day breaks, dates and call times included.

Look at the Checks card while the message is up: the new days moved the bus depot scenes onto dates the depot can't be used. That's why a suggestion is a starting point, and why Undo is right there.

Try it

  1. Open Last Light (Open the sample film on the start screen) and, under Scheduling, choose Shooting order.
  2. Find scene 41 on day 3: EXT, OLD MILL ROAD, Night. Its strip is light green: night, outside.
  3. Select the strip for scene 41: click it, or Tab to it and press Enter. The Scene 41 panel opens beside the board.
  4. In On, choose Day 1. Scene 41 moves to the end of day 1 and a red ! appears by its number.
  5. Read the Checks card. It now says 1 to look at: Night outside on a day shoot. Day 1 is called for 6:00 a.m. and wraps 6:30 p.m., before the 7:07 p.m. sunset. The move still happened: checks warn, they don't stop you.
  6. Put scene 41 back: in On, choose Day 3, then choose the up arrow (Move up) once so it sits above scene 42 again. The Checks card goes back to nothing to fix.
  7. Leave Day breaks every at 5 pages and choose Suggest day breaks. Read the message: 25 shoot days.
  8. Choose Undo. The board is back to 18 shoot days, dates and call times included.

Check your work

The Shooting order screen after step 5. Scene 41, a light green strip with a red exclamation mark by its number, now sits at the end of day 1 under four pale yellow Main Street strips. The Checks card reads 1 to look at, above its two ticked checks: Night outside on a day shoot, scene 41 on day 1 (Mon, Oct 12) is a night exterior; sunset is 7:07 p.m., and the day is called for 6:00 a.m. and wraps 6:30 p.m. The Scene 41 panel shows On Day 1. Callouts mark the flagged strip, the warning and the On menu.
After step 5. Yours should look like this.
  1. Scene 41 on day 1, flagged with !.
  2. The warning, with the times that cause it.
  3. On shows the day it's on now.
Watch outNothing after the shooting order fills in until there are day breaks. Who works which day, the daily plans and the budget's shoot days all count days, and with no day breaks there are none.
Watch outNew scenes don't land on a day by themselves. They wait under Not on a day yet at the bottom of the board, and don't count until you move them above a day break. The Checks card reminds you how many are waiting.
Watch outUndo only comes with whole-board changes, and only until you dismiss it, make another big change or leave the screen. A single move has no Undo: move the strip back yourself with On and the arrows, as in step 6.
Watch outThe samples don't save themselves. To keep a board you've changed, use Save as… and give the file a new name.

Quick check

Pick an answer to see why it is or isn’t right. Nothing is scored.

Question 1

Your 1st AD asks for scene 41, a night exterior, on day 1, which wraps at 6:30 p.m. You move it and the Checks card says Night outside on a day shoot. What happened?

Question 2

Your producer wants to see a version with all the Old Mill nights in week two, without losing the plan everyone has now. What do you choose?

Question 3

Your writer adds a new scene to the script. Where is it in the shooting order?

Written for C-47 Production Engine 0.9.2 beta. Screens may change as the beta does. · Savage Light Studios